Required Books
The references listed below are necessary to prepare for the examination and will NOT be provided at the testing center. As of 08/01/17 Candidates must provide their own reference materials.
Reference materials must be hardback or soft-cover (no loose-leaf). References can be highlighted but may only be tabbed with tabs manufactured or provided by the publisher.
The book for the Business and Law portion of the exam can only be obtained by directly contacting the State Licensing Board. The references listed below are available for purchase from our online contractor’s bookstore or by calling our office at 1-800-992-1910.
Notice: As of January 1, 2019 the 2018 North Carolina Codes will be in effect for testing. Please contat us if you have questions
*There are additional downloadable documents for the North Carolina Heating Group 1, Class 2 exam*
North Carolina General Statutes Chapter 87, Article 2, 21 North Carolina Administrative Code Chapter 50.
The Uniform Boiler and Pressure Vessel Act, NC Dept of Labor
NOTE: Though not on the book list, the ACCA Duct Slide Rule will be provided for use at the exam. It would be beneficial to know how to use it before testing. Instruction on using the ACCA Duct Slide Rule is covered in our seminar.
Add All Required Books to Cart ($790.50)
-
Includes all of the administrative codes and policies of the 2015 North Carolina State Building Codes.
-
This is a fully integrated code based on the 2015 International Energy Conservation Code.
-
This is a fully integrated code based on the 2015 International Fuel Gas Code.
-
This is a fully integrated code based on the 2015 International Mechanical Code.
-
This durable two-sided plastic sizing wheel (or "ductulator") comes with a complete instruction manual for residential and commercial…
-
American Contractors Exam Services
Commerical Applications, Systems, and Equipment: Manual CS (Soft Cover) by Hank Rutkowski, First Edition. Published by Air Conditioning…
-
Residential Duct System Manual D, 3rd Edition, by Hank Rutkowski. Design a residential duct system in less time…
-
Manual J® is the industry standard residential load calculation method, required by most building codes around the country.…
Additional Services
-
-
New Application Processing Fee for North Carolina License
Confirm This Is the Right License for Your Work
Every state licensing board defines the exact project types, sizes, and trades that fall under each contractor classification. Review the scope below to make sure this license matches the work you actually do — then enroll in the seminar that prepares you for that exam the first time.
The Heating Group 1, Class 2 classification covers the heating system of a building which requires the use of high pressure or low pressure steam, vapor, or hot water including all piping, ducts, and mechanical equipment appurtenant thereto with, adjacent to, or connected with a building for comfort heating. Class 2 contractors may do this work in single family detached residential buildings only.
License Requirements
- Pre-approval from the state is required to sit for the examination.
- Please note that there is a separate North Carolina Business and Law exam that needs to be passed to get this license. The Business Law exam is taken at the same time as the trade exam and the price for the Business Law exam is included in the trade exam fee.
Applicants are required to have at least 4,000 hours (2 years) of on site full time experience in the design or installation of plumbing or heating systems related to the category for which license is sought, even if no license was required for the work performed.
Up to one half or 2,000 hours (45 quarter hours or 30 semester hours) of the experience requirement may be in academic or technical training directly related to the category for which the exam is requested.
- There are no State mandated minimum financial, bonding, or insurance requirements for this license at this time.
Reciprocity
North Carolina does not have reciprocity for this license.
Continuing Education
North Carolina requires 6 hours of approved continuing education every year as a condition of license renewal. Continuing education hours must be completed prior to your license expiration each year. 4 hours of continuing education must be on the current code related to your license and 2 hours must be on a subject related to heating.The Exam
- The fee for the exam is $100 ($25 application fee and $75 for the exam).
- The Heating Group 1, Class 2 exam has 90 questions with a time limit of 4 hours. The Business Law exam has 50 questions with a 1.5 hour time limit. As of August 1, 2017 The Board will NOT supply all required reference materials at the test center. Candidates MUST bring their own books to the exam.
The exam is designed to test the applicant’s knowledge concerning the analysis of plans and specifications, estimating costs, fundamentals of installation and design, codes, fire hazards, and related subjects as they pertain to heating.
- An applicant has 30 days to take the exam once approval has been given.
- To schedule your exam after obtaining approval, contact PSI at 1-800-733-9267.
How We Help You Prepare
American Contractors offers a preparation seminar for the North Carolina Heating Classifications. We also carry all the HVAC, Plumbing, Fire Sprinkler and Fuel Piping books needed for the exams. Please contact us for additional information, 1-800-992-1910.
To apply, contact North Carolina State Board of Examiners for Plumbing, Heating, and Fire Sprinkler contractors at 1-919-875-3612.
The fee for the application is $25 and the licensing fee for initial license and for renewal is $125.
Applications will be processed in 2 to 4 weeks from the time they are received.
All licenses expire on the last day of December in each year following their issuance or renewal.
Important Contacts
