Name: North Carolina Boring & Tunneling
Brand: American Contractors Exam Services
SKU: c277
Availability: LimitedAvailability

Required Books

All the books listed under “Reference Materials” on this page are used to create the exam and are recommended for study. However, only the following books are allowed into the exam room while testing. They are: NC OSHA Standards for the Construction Industry and Handbook for Rigging: For Construction and Industrial Operations, 4th Edition, 1988 These references may be tabbed (with permanent index tabs) and highlighted. They are available for purchase from our online contractor’s bookstore or by calling our office at 1-800-992-1910.

*There are additional downloadable documents for the North Carolina Boring and Tunneling exam*

In addition to the books listed under "Reference Materials" on this page, there are several downloadable documents that are needed to prepare for the exam. They can be viewed and printed by selecting the link :

With the print edition discontinued, this title is no longer available for resale thru booksellers. Likewise, ASCE does not sell the e-book version through bookstores. Students have the option to purchase the e-book directly through the ASCE Library website at http://ascelibrary.org/doi/book/10.1061/9780784404065 for their own personal use.

Laws and Regulations Applicable to General Contracting in the State of North Carolina.

North Carolina Administrative Code, Title 15A, Chapter 4 Sedimentation Control, as amended July 1, 2000.

North Carolina General Statutes Chapter 113A, Article 4 Sedimentation Pollution Control Act of 1973, as amended through October 2002.

North Carolina One Call.

Code of Practice for Tunnels Under Construction, 1991.

Cost Estimating for Underground Transit: Too Dangerous to Guesstimate, 1997.

Add All Required Books to Cart ($873.75)

Design and Control of Concrete Mixtures, 17th

Bookstore

Design and Control of Concrete Mixtures--the guide to applications, methods, and materials, has been the industry’s primary reference…

$149.00
Add to cart
Handbook of Rigging, 5th Edition

Bookstore

Hardback, 792 pgs The Ultimate Guide to Designing and Operating Safe, Efficient Rigging Systems Recent years have seen…

$169.00
Add to cart
Business and Law NASCLA

NASCLA Contractors Guide to Business Law and Project Management , North Carolina for Building 10th ed

Bookstore

North Carolina General, Contractors Guide to Business, Law and Project Management is organized into 3 sections. Part 1…

$94.75
Add to cart
North Carolina OSHA 1926

Bookstore

North Carolina Occupational Safety and Health Standards for the Construction Industry, from the North Carolina Department of Labor…

$54.00
Add to cart
Pipe & Excavation Contracting

Bookstore

Pipe and Excavation Contracting by Dave Roberts; published by Craftsman Book Co; (2011). Pipeline contracting can be rewarding…

$49.00
Add to cart
Placing Reinforcing Bars 10th, 2019

Bookstore

Published by the Concrete Reinforcing Steel Institute (CRSI), this book is unique and popular resource that presents the…

$109.00
Add to cart
Standard Construction Guidelines for Microtunneling

Bookstore

USUALLY SHIPS IN 5-7 BUSINESS DAYS - This Standard Guideline covers the planning, design, pipe materials, and construction…

$169.00
Add to cart
Training & Certification of Field Personnel For Unbonded Post-Tension

Bookstore

This manual is used in conjunction with PTI's Level 1 Field Fundamentals training program. Provides guidance for field…

$80.00
Add to cart

Additional Services

NC HVAC App Fee - Made payable to the "State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors"

Application Processing

$100.00
Add to cart
NC HVAC Application Processing

Application Processing

$149.00
Add to cart
North Carolina - Check made payable to "North Carolina Board for General Contractors" for "LIMITED LICENSE"

Application Processing

North Carolina - Check made payable to "North Carolina Board for General Contractors" for "LIMITED LICENSE"

$75.00
Add to cart
North Carolina - Check made payable to "North Carolina Board for General Contractors" for "UNLIMITED LICENSE"

Application Processing

North Carolina - Check made payable to "North Carolina Board for General Contractors" for "UNLIMITED LICENSE"

$125.00
Add to cart
North Carolina - Check made payable to "North Carolina Board for General Contractors" for an "INTERMEDIATE LICENSE"

Application Processing

North Carolina - Check made payable to "North Carolina Board for General Contractors" for an "INTERMEDIATE LICENSE"

$125.00
Add to cart
North Carolina - Check made payable to the "State Board of Examiners of Electrical Contractors"payday loan

Application Processing

North Carolina - Check made payable to the "State Board of Examiners of Electrical Contractors"

$150.00
Add to cart
North Carolina Application for Certificate of Authority

Application Processing

$250.00
Add to cart
North Carolina Application Processing

Application Processing

New Application Processing Fee for North Carolina License

$299.00
Add to cart
North Carolina Renewal Processing Fee

Application Processing

$75.00
Add to cart
North Carolina- Check made payable to the "State Board of Examiners of HVAC Contractors"

Application Processing

North Carolina- Check made payable to the "State Board of Examiners of HVAC Contractors"

$200.00
Add to cart

Confirm This Is the Right License for Your Work

Every state licensing board defines the exact project types, sizes, and trades that fall under each contractor classification. Review the scope below to make sure this license matches the work you actually do — then enroll in the seminar that prepares you for that exam the first time.

The Boring and Tunneling classification covers the construction of underground or underwater passageways by digging or boring through and under the earth’s surface, including the bracing and compacting of such passageways to make them safe for the purpose intended. This classification also includes the preparation of the ground surfaces at points of ingress and egress.

License Requirements

Pre-approval from the state is required to sit for the examination.
Please note a separate North Carolina Business and Law exam is not needed, that information is incorporated into the Boring and Tunneling exam.
A license is required for projects that are $30,000 or more.
There is no minimum experience requirement.
All licenses covered by the commercial licensing board are divided into 3 financial categories:
Limited: Applicants must have a minimum working capital of $17,000. This level allows bids up to $500,000 per single project.
Intermediate: Applicants must have a minimum working capital of $75,000. This level allows bids up to $1,000,000 per single project.
Unlimited: Applicants must have a minimum working capital of $150,000. This level has no restrictions as to the value of any single project.
Applicants for the Intermediate and Unlimited license must submit audited financial statements with classified balance sheets prepared by a CPA or independent accountant engaged in the public practice of accounting.

Surety bonds are required for applicants with insufficient working capital. The board may request that a surety bond and payment bond be obtained for jobs above a certain monetary level.

Reciprocity

North Carolina has no reciprocity agreements for this license.

Continuing Education

As of this time, there is no continuing education for this license.

The Exam

The fee for the exam is $60 and a score of at least 70% is required to pass the exam.
The exam is open-book, 60 multiple-choice questions, and has a 2 hour time limit..
Not all recommended reference books are allowed into the exam.
Topics covered on the exam are site-work, boring and tunneling, safety, erosion and sedimentation control, laws and regulations, One Call, concrete, concrete reinforcement, hoisting and rigging, and liens.
Once you are approved you will receive an eligibility letter to schedule your testing. The eligibility letter is valid for 120 days from the date on the letter and allows the candidate to take 1 exam within that time frame.
To schedule your exam you must contact PSI at 1-800-733-9267.
Failing candidates may not retake an exam until at least 30 days after the failed exam.

How We Help You Prepare

American Contractors offers a 2 day seminar to prepare for the North Carolina Residential Building contractor license exam which will help aid is preparing for the Boring & Tunneling exam. Please contact us for additional information, 1-800-992-1910.

To apply, contact State of North Carolina Licensing Board 1-919-571-4183.

The licensing fees are

Limited $75, Intermediate $100, and Unlimited $125.

Applications are cleared for approval to take the exam as soon as they are received. However, once exams are passed, applications are submitted to the board for review.

Applications must be submitted the 1st week of the month prior to the next board meeting (ex. 1st week of June for July approval).

The board meets once per month in every month except December. Therefore, processing time would be 1 to 2 months depending on the date submitted to the board.

All general contractors licenses expire December 31 each calendar year and normally are not issued during the month of December.

Important Contacts

To apply for a General Contractor and related trade licenses, contact:

Licensing Board for General Contractors
Post Office Box 17187
Raleigh, NC 27619
(919)571-4183

www.nclbgc.org

Applications and licensing information for Electrical licenses may be obtained be obtained from:

Board of Examiners of Electrical Contractors
PO Box 18727
Raleigh, NC 27619
(919)733-9042

www.ncbeec.org

Applications and Exam information for Plumbing, Heating & Fire Sprinkler license may be obtained from:

Board of Examiners of Plumbing, Heating & Fire Sprinklers
1109 Dresser Court
Raleigh, NC 27609
(919)875-3612

www.nclicensing.org

For all examinations Contact:

PSI Licensure: Certification
ATTN: Examination Registration NC
3210 E Tropicana
Las Vegas, NV 89121
(800) 733-9267 phone
702.932.2666 fax

www.psiexams.com

Full Seminar Schedule

Compare upcoming dates, locations, and class details. Use the Choose button to move a session into the registration selector.

No public class dates are currently imported for this seminar.

American Contractors Exam Services can confirm whether a private, webinar, or custom training option is available for this license path.

Explore Custom Training Today

What Past Attendees Say

This two day course was the missing link I needed to pass the general contractors exam.

Jason C.

5-star Google review

With the help of their exam prep seminar I passed the licensing exam on the first try!

Jim C.

I have taken classes here and they are worth it! All their instructors were very knowledgeable and helpful.

Amy G.

North Carolina Boring & Tunneling

What Is Included in Your Seminar

Required Books

Design and Control of Concrete Mixtures, 17th

Handbook of Rigging, 5th Edition

NASCLA Contractors Guide to Business Law and Project Management , North Carolina for Building 10th ed

North Carolina OSHA 1926

Pipe & Excavation Contracting

Placing Reinforcing Bars 10th, 2019

Standard Construction Guidelines for Microtunneling

Training & Certification of Field Personnel For Unbonded Post-Tension

Additional Services

NC HVAC App Fee - Made payable to the "State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors"

NC HVAC Application Processing

North Carolina - Check made payable to "North Carolina Board for General Contractors" for "LIMITED LICENSE"

North Carolina - Check made payable to "North Carolina Board for General Contractors" for "UNLIMITED LICENSE"

North Carolina - Check made payable to "North Carolina Board for General Contractors" for an "INTERMEDIATE LICENSE"

North Carolina - Check made payable to the "State Board of Examiners of Electrical Contractors"payday loan

North Carolina Application for Certificate of Authority

North Carolina Application Processing

North Carolina Renewal Processing Fee

North Carolina- Check made payable to the "State Board of Examiners of HVAC Contractors"