Name: Oklahoma Process Piping Contractor
Brand: American Contractors Exam Services
SKU: c863
Availability: LimitedAvailability

Required Books

The references listed below have been used to create the test questions and are used in our seminar to prepare you to better navigate these books and pass the exam.

Add All Required Books to Cart ($1,763.95)

2018 International Mechanical Code, Soft-cover

Bookstore

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles…

$111.25
Add to cart
Plumbing

ASME A13.1 - 2015 Scheme for the Identification of Piping Systems (Special Order)

Bookstore

This Standard is intended to establish a common system to assist in identification of hazardous materials conveyed in…

$87.75
Add to cart
ASME B31.3 -2024 Process Piping (Special Order)

Bookstore

SHIPS 7-10 BUSINESS DAYS This Code contains rules for piping typically found in petroleum refineries; chemical, pharmaceutical, textile,…

$985.00
Add to cart
Plumbing

Facility Piping Systems Handbook 2009 3rd Ed. (Special Order)

Bookstore

A Comprehensive Guide to Facility Piping Systems Fully up-to-date with the latest codes and standards, this practical resource…

$235.00
Add to cart
Plumbing

Mathematics for Plumbers & Pipefitters, 8th Edition

Bookstore

Mathematics for Plumbers and Pipefitters by Lee Smith, J. Russel Guest, Bartholomew D'Arcangelo, Benedict D'Arcangelo. th Edition. An up-to-date…

$270.00
Add to cart
OSHA 29. CFR 1926 for Contractors Highlighted & Tabbed

Bookstore

Occupational Safety & Health Standards for the Construction Industry (OSHA Standards for the Construction Industry), Published by American…

$55.00
Add to cart
Permanent Tabs for the 2018 International Mechanical Code

Bookstore

Permanent Tabs for the 2018 International Mechancial Code

$19.95
Add to cart

Additional Services

Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Journeymans License)apay

Application Processing

Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Journeyman License)

$75.00
Add to cart
Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Plumbing Contractors)pay

Application Processing

Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Plumbing Contractors)

$225.00
Add to cart
Oklahoma Application Processing

Application Processing

New Application Processing Fee for Oklahoma License

$249.00
Add to cart

Confirm This Is the Right License for Your Work

Every state licensing board defines the exact project types, sizes, and trades that fall under each contractor classification. Review the scope below to make sure this license matches the work you actually do — then enroll in the seminar that prepares you for that exam the first time.

Covers work in the installation, repair, alteration or extension of the piping and tubing which conveys liquids or gases that are used directly in research, laboratory, or production processes.

License Requirements

The first step in the licensing process is to submit a completed application to the state licensing board to obtain approval to test. Applicants must be at least 18 years of age and verify at least 3 years of experience. There are no state mandated minimum financial requirements for this license.

Reciprocity

The Board may enter into a reciprocity agreement with another State if the requirements for licensure in the other State are deemed by the Board to be substantially the same or equivalent to the requirements for obtaining an original license by examination in this state

Continuing Education

Oklahoma requires that 6 hours of approved CE must be completed every 36 months (3 years). A licensee is exempt from these requirements for 3 years from the date he or she initially passes the current licensing exam. As of July 1, 2014, no contractor or journeyman license shall be renewed unless 6 hours of Continuing Education, within the last 36 months (3 years), have been completed. Thereafter, 6 hours of CE must be completed every 3 years (36 months).

The Exam

The exam is given by PSI. It is an open-book, timed test with 40 questions and a 2-hour time limit. A score of at least 70% is required to pass the exam.

The test fee is $100.

Exam Content : General Knowledge and Definitions Estimating and Plan Reading Pipe Materials, Uses and Properties Piping Installation and Fitting Hangers and Supports Valves and Controls Safety

How We Help You Prepare

American Contractors currently does not offer a seminar for Oklahoma Process Piping Contractor but does carry the references needed to study and may have seminars that will assist those with general knowledge and book use.

Fees must accompany the application. The licensing fee is $75. ($50 for License & $25 for processing)

Applications are reviewed once per week. Wait time for approval should be minimal.

Plumbing, Mechanical & Electrical construction are regulated at the state level.
For license requirements and an application, contact:

State of Oklahoma
Construction Industries Board
2401 N.W. 23rd Street, Suite 5
Oklahoma City, OK 73107
405.521.6550
405.521.6526 fax
877.484.4424
www.cib.state.ok.us/

Important Contacts

www.cib.state.ok.us/

Oklahoma trade examinations are administered by:

PSI Licensure: Certification
3210 East Tropicana
Las Vegas, NV 89121
(800) 733-9267 phone
702.932.2666 fax

www.psiexams.com

Full Seminar Schedule

Compare upcoming dates, locations, and class details. Use the Choose button to move a session into the registration selector.

No public class dates are currently imported for this seminar.

American Contractors Exam Services can confirm whether a private, webinar, or custom training option is available for this license path.

Explore Custom Training Today

What Past Attendees Say

This two day course was the missing link I needed to pass the general contractors exam.

Jason C.

5-star Google review

With the help of their exam prep seminar I passed the licensing exam on the first try!

Jim C.

I have taken classes here and they are worth it! All their instructors were very knowledgeable and helpful.

Amy G.

Oklahoma Process Piping Contractor

What Is Included in Your Seminar

Required Books

2018 International Mechanical Code, Soft-cover

ASME A13.1 - 2015 Scheme for the Identification of Piping Systems (Special Order)

ASME B31.3 -2024 Process Piping (Special Order)

Facility Piping Systems Handbook 2009 3rd Ed. (Special Order)

Mathematics for Plumbers & Pipefitters, 8th Edition

OSHA 29. CFR 1926 for Contractors Highlighted & Tabbed

Permanent Tabs for the 2018 International Mechanical Code

Additional Services

Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Journeymans License)apay

Oklahoma - Check made payable to the "Oklahoma Construction Industries/ Plumbing (Plumbing Contractors)pay

Oklahoma Application Processing