Oklahoma Sheet Metal Journeyman | EXAMPREP.ORG

Oklahoma Sheet Metal Journeyman

This license allows work under the supervision and in the employ of a Sheet Metal Contractor to manufacture, assemble, cast, cut, shape, forge, fabricate, weld, repair, recondition, adjust and install sheet rolled metal of any kind or combination and all other air-conveyor systems and air handling systems regardless of materials used, including all equipment and all reinforcements in connection therewith.

SKU: c539 Category: Tag:

Required Books 

The references listed below have been used to create the test questions and are used in our seminar to prepare you to better navigate these books and pass the exam.

Add All Required Books to Cart ($688.95)

Additional Services

The first step in the licensing process is to submit a completed application to the state licensing board to obtain approval to test.

EXPERIENCE REQUIRED: Applicants must be at least 18 years of age and verify at least 3 years of experience.

BUSINESS AND LAW: The Journeyman is not required to take the Mechanical Business and Law Exam

This license allows work under the supervision and in the employ of a Sheet Metal Contractor to manufacture, assemble, cast, cut, shape, forge, fabricate, weld, repair, recondition, adjust and install sheet rolled metal of any kind or combination and all other air-conveyor systems and air handling systems regardless of materials used, including all equipment and all reinforcements in connection therewith.

Fees must accompany the application.   The licensing fee is $75. ($50 for License & $25 for processing)

Applications are reviewed once per week. Wait time for approval should be minimal.

Plumbing, Mechanical & Electrical construction are regulated at the state level.
For license requirements and an application, contact:

State of Oklahoma
Construction Industries Board
2401 N.W. 23rd Street, Suite 5
Oklahoma City, OK 73107
405.271.5217

Important Contacts

Plumbing, Mechanical & Electrical construction are regulated at the state level.
For license requirements and an application, contact:

State of Oklahoma
Construction Industries Board
2401 N.W. 23rd Street, Suite 5
Oklahoma City, OK 73107
405.521.6550
405.521.6526 fax
877.484.4424
Oklahoma trade examinations are administered by:

PSI Licensure: Certification
3210 East Tropicana
Las Vegas, NV 89121
(800) 733-9267 phone
702.932.2666 fax


The Board may enter into a reciprocity agreement with another State if the requirements for licensure in the other State are deemed by the Board to be substantially the same or equivalent to the requirements for obtaining an original license by examination in this state

Oklahoma requires that 6 hours of approved CE must be completed every 36 months (3 years). A licensee is exempt from these requirements for 3 years from the date he or she initially passes the current licensing exam.   As of July 1, 2014, no contractor or journeyman license shall be renewed unless 6 hours of Continuing Education, within the last 36 months (3 years), have been completed.  Thereafter, 6 hours of CE must be completed every 3 years (36 months).

The exam is given by PSI. It is an open-book, timed test with 50 questions and a 2-hour time limit. A score of at least 70% is required to pass the exam. The test fee is $100.00.

EXAM CONTENT: General Knowledge Duct Sizing, Design and Hanging & Support Requirements Duct Fabrication and Installation Plenums Appliance Venting and Combustion Air Ventilation and Exhaust Devices Safety

American Contractors currently does not offer a seminar to prepare for the Oklahoma Sheet Metal Journeyman. We do carry all the references needed to prepare for the exam.